- PEEK Rods
- 2017-12-22 11:49
- PEEK tube is an extremely tough, wear resistant thermoplastic tube with excellent physical and chemical properties. Features: Very dimensionally stable Creep resistance Excellent chemical resistance Long term use at high temperature (Melting point: 343℃)
- EPTFE Microporous Film
- 2017-12-21 17:49
- PTFE microporous membrane is produced by two-way stretch method based on PTFE resin pore-forming characteristics. It has the features of waterproof, moisture permeable, windproof and warm. It is compounded with other fabrics, widely used as clothing mater
- PTFE V-packings
- 2017-12-11 12:05
- PTFE V-packings ( V-ring sets) are composed of a male and female component pressing each other and various number of v profile rings between them, the number of rings depending on operating conditions. V-rings provide sealing without any need for modifica
- Virgin PTFE TFM Diaphragms
- 2017-11-29 20:05
- Virgin PTFE TFM diaphragms PTFE is a thermoplastic resin that is practically resistant to all fluids and its products have very good mechanical properties which are required in pump and valve applications. We can customize all kinds of PTFE diaphragms use
- PTFE Microwave Digestion Vessel
- 2017-11-29 07:03
- Microwave digestion vessel materials include PTFE,TFM®-PTFE, PFA which meet the combined requirements of acid, heat and pressure resistance. PTFE,TFM ® melting point: 320-340℃ Maximum practical using temperature:260℃. PFA melting point: appox.308℃.Maximum
- Teflon PTFE Pulley Wheels
- 2017-11-17 15:32
- Rayflon provides a wide variety of custom designed PTFE machined parts like PTFE bushings, bearings, pulleys and rolls that meet customer specifications. All parts are precision machined by CNC lathes within the smallest tolerance range. All materials PTF
- PTFE Washer/Gasket, PTFE Valve Seat, PTFE Ring/Seal
- 2017-11-10 21:29
- PTFE Washer/gasket,PTFE Valve Seat, PTFE Ring/Seal Basic Info Model NO.: Customized Application: Cylinder Performance: Design for Application Standard: Nonstandard Features: Cost Effectiveness Chemical Compatibility Packings: Carton Case or According to C
- PTFE CNC Machined Components
- 2017-11-07 02:13
- High quality PTFE CNC machined parts/components . Most of our PTFE components are fabricated by compression molding then CNC machining to meet precision dimension requirements, smooth surface, no burrs along with Fluoropolymer characteristics like chemica
- PTFE Seating Rings For Butterfly Valve
- 2017-10-17 17:05
- Butterfly valve seating rings PTFE Rayflon is specialized in manufacturing and exporting various valve seats and seals made from high quality PTFE and filled PTFE. PTFE or Teflon® as it is commonly known is a fluorocarbon based polymer and is usually the
- PTFE Flat Washers
- 2017-10-14 23:48
- PTFE flat washers Rayflon manufacturescustoms a wide range of PTFE Teflon® washers for any required sizes. Except common washers in simple round and square shapes, special custom configuration such as washers having numerous holes or shoulders are availab
- PTFE Valve
- 2017-09-29 01:48
- Rayflon specially offer the high purity valve products available for semiconductor, ultra-pure water and aggressive chemical or gas applications using high quality PTFE or PFA. The PTFE and PFA material provide chemical resistance to the corrosive chemica
- Virgin PTFE Piston Seals
- 2017-09-22 18:31
- PTFE piston seals are available in various shapes and compounds. The selection should be made on the basis of pressure, temperature, and the type of air or fluid medium in which the cup must function. Material include: Virgin PTFE, POB filled PTFE, PI (Po
- PFA Wafer Cassettes
- 2017-09-21 13:50
- Chemical inertness and non-wetting properties make PTFE,TFM ® , PFA ideal materials for use in semiconductor applications. Rayflon can produce large components in PTFE,TFM, PFA, which are thermally stable and clean for use in semiconductor equipment. This
- PEEK Bushings
- 2017-09-19 15:08
- Precision machined / molded PEEK bushings Rayflon provides high precision machined or molded PEEK bushings, tolerance usually is controlled within 0.003. Material: virgin or carbon filled PEEK. Type: Standard, flanged and custom type Features: Excellent c
- Fluoroplastic Resins
- 2017-08-23 05:42
- Except PTFE, another key field at Rayflon is importing high quality and cost effective melt-processable fluorothermoplastic resins to distribute in China, represented by PFA, MFA, FEP, ETFE from Daikin, Solvay, AGC, Dyneon, etc . Play a major role in Chin
- PTFE Washers
- 2017-08-22 19:57
- Basic Info Item:Teflon PTFE washers Application:Insulators, Connector Type:Solid Chemistry:Inorganic Insulation Material: Virgin PTFE and filled PTFE Temperature range: -180℃~+260℃ Color:White or others Place of Origin: Shanghai China Trademark: Rayflon S
- PTFE Seals Hydraulic Piston Seals
- 2017-08-12 22:14
- Basic Info Item: PTFE Seals Hydraulic Piston Seals Usage: Engine, Transmission, Rear Axle Speed: =4m/S Lip: Lips Type Company Type: Manufacturer Trader Color: Black, Blue or Any Color Package: Customized Origin: Shanghai China Material: PTFE Type: Piston
- PTFE PFA Screw Caps
- 2017-07-31 23:03
- PTFE PFA screw caps are designed for sample bottles, containers, jars with the most advantage processing technology. Material: Single PTFE, PFA or bonding with other plastic/ rubber materials. Performance: FDA approved materials High purity, preventing co
- PTFE Balls
- 2017-07-18 20:17
- In the fluid handling industry, PTFE balls are used in ball valves that have contact with extremly corrosive liquids. Properties: Smooth polished surface Chemical and corrosion resistance High operating temperature resistance( up to 260℃) Self-lubrication
- Devlon Valve Seats
- 2017-07-11 08:30
- Devlon® material is one of the toughest and hardest wearing thermoplastics available. It provides wear resistance, impact strength, and low moisture absorption properties. Valves with Devlon® seat inserts are mainly used in oil and gas pipelines. Property
